This oxygen facial machine sits within Fotromed’s broader Máquina hidrofacial categoría. Buyers choosing the Oxygen Revive typically want a hydro facial platform where oxygen therapy is the core revenue driver, not a bolt-on accessory.
The Oxygen Revive runs a four-stage protocol centered on its built-in oxygen generator. The hydra dermabrasion handle prepares the skin, the oxygen generator powers the core treatment, and the remaining modules extend the protocol for clinic-specific indications.
The H2O2 hydra dermabrasion handle uses vacuum-assisted suction at up to 1 bar to perform deep pore cleansing while infusing a hydrogen-and-oxygen serum into the skin. This is the preparation step that precedes oxygen infusion — it clears sebum, espíritu, and keratinized cells so the oxygen-rich serums delivered later can reach the dermal layer without surface obstruction.
The Oxygen Revive’s molecular-sieve oxygen generator is the technical anchor of the entire platform. It produces ≥95% pure oxygen at a stable 3 L/min flow rate directly from ambient air — no external oxygen tank, no consumable cartridge, no refill logistics. This oxygen output is delivered to the skin through two dedicated handles:
The built-in generator design is what separates the Oxygen Revive from standard multi-in-1 hydro facial machines, where “oxígeno” usually means a low-flow ambient-air pump bolted onto a hydra dermabrasion base.
Two additional handles support manual exfoliation when the protocol calls for it. The diamond dermabrasion handle uses interchangeable diamond-tip wands for controlled physical exfoliation of textural irregularities, and the ultrasonic skin scrubber uses high-frequency vibration to dislodge embedded debris from enlarged pores.
The remaining four handles extend the treatment into bio-stimulation, terapia con luz, and acne management — letting clinics build differentiated protocols on the same hardware. The bio microcurrent wand applies low-level bio-electrical currents through three programmable modes for facial contouring. The ultrasonic facial handle increases serum penetration through cellular vibration. The PDT LED handle delivers red, azul, and green wavelengths for collagen support, control del acné, y pigmentación. The high-frequency handle generates localized warmth and ozone for acne lesion management.
The Oxygen Revive’s molecular-sieve generator outputs ≥95% pure oxygen at 3 L/min — a flow rate and purity that standard multi-in-1 hydro facial machines do not match. This is the single hardware difference that justifies pricing the device as an oxygen facial platform rather than a general hydra dermabrasion unit.
| Parámetro | Oxígeno revivir | Standard Multi-in-1 Hydro Devices |
|---|---|---|
| Oxygen source | Built-in molecular-sieve generator | External ambient-air pump or none |
| Oxygen purity | ≥95% pure oxygen | aire ambiente (~21% O₂) |
| Oxygen flow rate | 3 L/min stable | Típicamente <1 L/min |
| Aspiradora | 1 barra máxima (heavy-duty pump) | 0.4–0.6 bar (standard pump) |
| Plataforma | 9-estación de trabajo en 1 | 3-in-1 or 4-in-1 base |
| External oxygen tank | No requerido | Required, or no real oxygen output |
The Oxygen Revive is sold with terms designed for both first-time single-clinic buyers and established distributors. The CE marking covers compliance with the EMC and LVD directives required for sale in the EU and most international markets.
| Nombre del producto | Revivir el oxígeno | |||||||||
| Tecnología(pieza de mango) |
|
|||||||||
| Salida máxima | 500Virginia | |||||||||
| Aspiradora | 1 Barra máxima | |||||||||
| Flujo de oxígeno | 3L/min | |||||||||
| Concentración de oxígeno | ≥95% | |||||||||
| Sistema de operación | 10.4″ Pantalla táctil | |||||||||
| Voltaje | 110-240VACACIONES ,50/60Hz | |||||||||
| Dimensiones externas | 53*42*80cm³ | |||||||||
| Peso de volumen | 82kilos |
The Oxygen Revive supports four clinical use categories through different combinations of its 9 manijas. Each protocol below describes which handles the operator typically engages and what skin concern the combination addresses.
The Oxygen Revive combines H2O2 hydra dermabrasion at 1 bar vacuum with diamond dermabrasion and the ultrasonic skin scrubber to clear sebum, comedones, and surface debris from congested skin. This protocol prepares the skin for any of the oxygen-based or bio-stimulation modules that follow.
The Oxygen Revive delivers ≥95% pure oxygen mixed with hydrating serums through the oxygen spray mist gun and then sustains the oxygen exposure through the inhalation mask. The protocol supports skin tissue hydration and helps improve the appearance of dull, dehydrated complexions.
The Oxygen Revive pairs the PDT LED (blue and red wavelengths) with the high-frequency handle to support acne-prone skin protocols. The blue light targets surface bacteria associated with active breakouts, while the red light and oxygen infusion phases support post-inflammatory healing.
The Oxygen Revive’s bio microcurrent and ultrasonic facial handles support facial contouring and serum-penetration protocols, while the oxygen infusion phase supports collagen-related treatment goals. The PDT LED green wavelength is used in pigmentation-focused protocols.
Deje un mensaje con sus preguntas y nuestros consultores le responderán dentro de 24 horas.
*Toda tu información es respetada. & protegido.
Cuéntanos qué tratamientos quieres ofrecer, su rango de presupuesto, y si necesita la marca OEM. Nuestro equipo le ayudará a comparar los dispositivos Fotromed adecuados, explicar las diferencias clave, y prepare una cotización clara con los detalles de envío. Le ayudaremos a encontrar una solución práctica para su clínica., spa, o negocio de belleza.
Certificación de productos
Certificación de fábrica
Descargar Catálogo
Contáctenos
