This oxygen facial machine sits within Fotromed’s broader 하이드로 페이셜 머신 범주. Buyers choosing the Oxygen Revive typically want a hydro facial platform where oxygen therapy is the core revenue driver, not a bolt-on accessory.
The Oxygen Revive runs a four-stage protocol centered on its built-in oxygen generator. The hydra dermabrasion handle prepares the skin, the oxygen generator powers the core treatment, and the remaining modules extend the protocol for clinic-specific indications.
The H2O2 hydra dermabrasion handle uses vacuum-assisted suction at up to 1 bar to perform deep pore cleansing while infusing a hydrogen-and-oxygen serum into the skin. This is the preparation step that precedes oxygen infusion — it clears sebum, 블랙헤드, and keratinized cells so the oxygen-rich serums delivered later can reach the dermal layer without surface obstruction.
The Oxygen Revive’s molecular-sieve oxygen generator is the technical anchor of the entire platform. It produces ≥95% pure oxygen at a stable 3 L/min flow rate directly from ambient air — no external oxygen tank, no consumable cartridge, no refill logistics. This oxygen output is delivered to the skin through two dedicated handles:
The built-in generator design is what separates the Oxygen Revive from standard multi-in-1 hydro facial machines, where “산소” usually means a low-flow ambient-air pump bolted onto a hydra dermabrasion base.
Two additional handles support manual exfoliation when the protocol calls for it. The diamond dermabrasion handle uses interchangeable diamond-tip wands for controlled physical exfoliation of textural irregularities, and the ultrasonic skin scrubber uses high-frequency vibration to dislodge embedded debris from enlarged pores.
The remaining four handles extend the treatment into bio-stimulation, 광선 요법, and acne management — letting clinics build differentiated protocols on the same hardware. The bio microcurrent wand applies low-level bio-electrical currents through three programmable modes for facial contouring. The ultrasonic facial handle increases serum penetration through cellular vibration. The PDT LED handle delivers red, 파란색, and green wavelengths for collagen support, 여드름 관리, 그리고 색소 침착. The high-frequency handle generates localized warmth and ozone for acne lesion management.
The Oxygen Revive’s molecular-sieve generator outputs ≥95% pure oxygen at 3 L/min — a flow rate and purity that standard multi-in-1 hydro facial machines do not match. This is the single hardware difference that justifies pricing the device as an oxygen facial platform rather than a general hydra dermabrasion unit.
| 매개 변수 | 산소 부활 | Standard Multi-in-1 Hydro Devices |
|---|---|---|
| Oxygen source | Built-in molecular-sieve generator | External ambient-air pump or none |
| Oxygen purity | ≥95% pure oxygen | 주변 공기 (~21% O₂) |
| Oxygen flow rate | 3 L/min stable | 일반적으로 <1 L/분 |
| 진공압력 | 1 바 최대 (heavy-duty pump) | 0.4–0.6 bar (standard pump) |
| 플랫폼 | 9-in-1 워크스테이션 | 3-in-1 or 4-in-1 base |
| External oxygen tank | 필요하지 않음 | Required, or no real oxygen output |
The Oxygen Revive is sold with terms designed for both first-time single-clinic buyers and established distributors. The CE marking covers compliance with the EMC and LVD directives required for sale in the EU and most international markets.
| 제품 이름 | 산소 부활 | |||||||||
| 기술(핸들 조각) |
|
|||||||||
| 최대 출력 | 500버지니아 | |||||||||
| 진공압력 | 1 바 맥스 | |||||||||
| 산소 플럭스 | 3L/분 | |||||||||
| 산소 농도 | ≥95% | |||||||||
| 운영시스템 | 10.4″ 터치 스크린 | |||||||||
| 전압 | 110-240VAC ,50/60헤르츠 | |||||||||
| 외부 치수 | 53*42*80cm³ | |||||||||
| 부피 중량 | 82kg |
The Oxygen Revive supports four clinical use categories through different combinations of its 9 핸들. Each protocol below describes which handles the operator typically engages and what skin concern the combination addresses.
The Oxygen Revive combines H2O2 hydra dermabrasion at 1 bar vacuum with diamond dermabrasion and the ultrasonic skin scrubber to clear sebum, 코미디언, and surface debris from congested skin. This protocol prepares the skin for any of the oxygen-based or bio-stimulation modules that follow.
The Oxygen Revive delivers ≥95% pure oxygen mixed with hydrating serums through the oxygen spray mist gun and then sustains the oxygen exposure through the inhalation mask. The protocol supports skin tissue hydration and helps improve the appearance of dull, dehydrated complexions.
The Oxygen Revive pairs the PDT LED (blue and red wavelengths) with the high-frequency handle to support acne-prone skin protocols. The blue light targets surface bacteria associated with active breakouts, while the red light and oxygen infusion phases support post-inflammatory healing.
The Oxygen Revive’s bio microcurrent and ultrasonic facial handles support facial contouring and serum-penetration protocols, while the oxygen infusion phase supports collagen-related treatment goals. The PDT LED green wavelength is used in pigmentation-focused protocols.
질문을 메시지로 남겨주시면 컨설턴트가 이내에 답변해 드립니다. 24 시간.
*귀하의 모든 정보는 존중됩니다 & 보호됨.
어떤 치료법을 제공하고 싶은지 알려주세요., 예산 범위, OEM 브랜딩이 필요한지 여부. 우리 팀은 적합한 Fotromed 장치를 비교하는 데 도움을 드릴 것입니다, 주요 차이점을 설명하세요., 배송 세부정보가 포함된 명확한 견적을 준비하세요.. 귀하의 진료소에 실용적인 솔루션을 찾도록 도와드리겠습니다., 온천, 혹은 뷰티 사업.
제품 인증
공장인증
카탈로그 다운로드
문의하기
